The micro USB connector can be used to connect the ROX®10.0 GPS to either a PC or Mac where the data can then be downloaded, stored, and analyzed using DATA CENTER 3.
The ROX®10.0 GPS comes with an integrated, highly sensitive SiRFstarIII GPS receiver. This receiver interprets the signals from GPS satellites and uses them to calculate the location of the ROX®10.0 GPS.
The integrated Li-ion rechargeable battery is charged using a micro USB cable. The same connection is also used to transmit data to and from the DATA CENTER 3. The battery takes 3 hours to charge and has a 13 hour capacity.
The ROX®10.0 GPS supports the new charging standard, most commonly known in relation to the new smartphones (EN 62684:2010). ROX®10.0 GPS and smartphone chargers are fully compatible thanks to their standardized charging voltage, charging current, and micro USB plug.
The cadence magnet pedal insert is designed for tight installation situations. The principle is simple, yet space-saving: the power magnet attaches to any steel pedal spindle by magnetic force alone. From there, it triggers the cadence transmitter with each crank revolution.
The ROX®10.0 GPS has an integrated three-axis compass which measures the Earth’s magnetic field three dimensionally. This makes it possible to measure direction irrespective of the tilt angle.
The ROX®10.0 GPS has a clear 1.7" full dot-matrix LCD with a resolution of 128 x 160 pixels and four gray scales per pixel. Font that has been specially optimized for cycling makes the device easy to read during rides.
The integrated lithium-ion rechargeable battery provides power for up to 13 hrs. of use. The battery takes 3 hours to charge with the MICRO USB cable connected to either an outlet or a PC.
The new fit and elasticity of the SIGMA ANT+ transmitters make them perfect for all frame and fork shapes. Of course, they can also be attached with a cable tie or O-rings.
The ROX®10.0 GPS firmware can be updated to the latest version using the DATA CENTER 3 software.
You can check your remaining memory space at any time and, if necessary, transfer the data to the SIGMA DATA CENTER and delete it from your ROX®10.0 GPS before a new ride to have 100% memory capacity.